
Rugrats Flooring Inc. :: Miscellaneous :: Carpet Base
| | How To Install Carpet BaseEasy instructions on how to install carpet base floor trim. Self adhesive, peel and stick Base King carpet trim for the wall. 24 colors sold here. |  | Remove the protective covering from the end of the carpet base to expose 18 to 24 inches of adhesive. Position the carpet base to a starting point and firmly press it onto the wall. Secure the end by using a rubber mallet or regular hammer to tap directly over the adhesive strip for 18 to 24 inches. |  | Gently stretch the carpet base as you apply it to the wall, making sure that the carpet base is meeting the carpet on the floor. Press firmly with your hands. |  | Secure the carpet base to the wall by rubbing the carpet firmly with the flat part of a hammer. Tapping lightly will also secure the adhesive. Use a pair of scissors or utility knife to cut the carpet base. |
Install the base into inside corners with a screwdriver or linoleum knife. Outside corners will wrap around easily. Short ends need special attention. In most situations, a small finish nail or brad will be sufficient. On concrete walls, either use a hot melt adhesive or contact cement if necessary.
| Result pages: |
1
|
2 |
 |
| Result pages: |
1
|
2 |
 |
Copyright © 2001-2008 Rugrats Flooring Inc.
|