Brass Return Air Grilles - Affordable Brass Vent Covers

Finally, brass return air grilles that won't empty your pocketbook. These brass vent covers are an all steel construction with a durable brass plated finish. The brass return air grille has 1/3 inch fin spacing set at a 20 degree angle. There is a 3/16 inch turnback margin. These brass vent covers allow for continuous air distribution.

Installing the brass return air grilles is easy. Included are 2 matching screws. The brass vent covers have 2 pre-drilled screw holes. Simply place over the wall opening and screw into place.

You will want to order the brass vent covers according to the hole size they will be covering, not by the outside dimension of the return grille you may be replacing. All grilles are sold by the hole size they are covering, this is the industry standard. A 10 x 6 inch brass return air grille would be placed over a 10 x 6 inch hole opening. Faceplate dimensions are given in the table below.

Metal Vent Cover Highlights

• Brass vents have a durable steel core
• 1/3 inch fin spacing at a 20 degree angle
• 3/16 of an inch turnback margin
• Beautiful brass plated finish

Brass Return Grille Available Sizes:

Use these brass return air grilles to match your other brass fixtures or to blend into your home or office's decor. Order today!

Additional Return Air Grille Finishes:

• White metal return air grilles
• White metal filter return air grilles
• Pewter return air grilles
• Plastic return air grilles