Dap Weldwood Contact Cement
Contact cement is just one of the Dap products you will find helpful to finish your project. This contact cement can be used on laminates, veneers, cork, paper, vinyl, fabrics, plywood and more. The contact cement takes about 30-40 minutes to dry (depending on temperature and humidity) and a 2-3 hour assembly/working time. This Dap product is a nonflammable waterborne adhesive that meets the strict requirements for professional use. This Dap product is not suitable for structural projects. Each can contains 32 oz of contact cement.
Contact Cement Clean-up Directions
-
When wet remove excess adhesive and clean tools with water and a mild cleaner
-
If the adhesive has dried use mineral spirits and a scraper
***This product is only for us as a covebase adhesive on non-porous surfaces. May also be used for Transitions & Adaptor Moldings, Wheeled Traffic Transitions and Vinyl Track Base.
***Always test the product on a small area first to ensure desired results.
Additional Dap Caulk Products:
Dap White Silicone Caulk
Dap Clear Silicone Caulk
Material Safety Data Sheet for this product. |