Water Based Grout Sealer - Stone Tile Maintenance

Gundlach’s water based grout sealer can be used on marble, travertine, porcelain, slate and so much more. Stone tile maintenance is a must when protecting your precious surfaces from UV rays or bad weather conditions. This water based grout sealer acts like a solvent but eliminates nasty odors or worry about flammability. Our water based grout sealer is a low VOC compliant, formula that cures in 24 hours.

Begin stone tile maintenance with this product that covers approximately 125 to 625 sq ft per quart. The water based grout sealer will seal your porous stone surfaces and will prevent oil based spills from staining or setting. This ready to use stone tile maintenance solution is expected to last for up to 15 years so try it today!

Grout & Stone Sealer Highlights

• Stone tile maintenance in 32 oz size
• Sealer cures in 24 hours
• Water based formula protects against oil and water stains
• Non flammable and has almost no odor
• Covers approximately 125-625 sq ft per quart
• Last up to 15 years
• Ready to use formula

Stone Tile Maintenance Directions:

• Water based grout sealer only works on clean and dry surfaces
• Using a low pressure sprayer or brush, apply solution evenly
• After 24 hours of curing test surface seal by water droplet test
• Apply a second or third coat as necessary
• Will dry to the touch 1 hour later
• When cleaning treated areas, only use a pH neutral cleaner

This amazing water based grout sealer is also available in an easy-to-use 14 oz aerosol can for even faster stone tile maintenance.

Our stone tile maintenance products are your key to sealing and protecting your expensive stone surfaces so purchase now.

Material Safety Data Sheet for this product.