Johnsonite 946 Contact Bond Adhesive - Transition Strip Adhesive

Install Johnsonite transition moldings such as the CTA-XX-A, CTA-XX-C and CTA-XX-D with the 946 contact bond adhesive. This transition strip adhesive is also recommended to install vinyl and rubber cove base on non-porous surfaces only, such as stainless steel. If you need to install cove base on a porous surface (such as drywall), please refer to the Johnsonite 960 Wall Base Adhesive. This Johnsonite transition strip adhesive contains no hazardous or carcinogenic ingredients defined by OSHA chemicals and meets all federal, state and local air quality regulations. Once opened, this contact bond adhesive can be used up to 2 hours, depending on temperature and humidity. Sold in a 1 KG (0.95 QT) container which can cover approximately 24 to 36 square feet.

When installation transition strips, brush or roll a uniform film of contact bond adhesive onto both the subfloor and the transition piece. Product is ready for installation when the adhesive is still tacky to the touch, but does not transfer to the finger.

Transition Strip Adhesive Highlights

• 946 contact bond adhesive sold in a 1 KG (0.95 QT) bucket
• Nonflammable, solvent free, acrylic water-based transition strip adhesive
• Do not use contact bond adhesive on exterior surfaces subject to weather
• Adhesive is made to be used with Johnsonite transition moldings and vinyl track base
• Use this contact bond adhesive with vinyl and rubber cove base on non-porous surfaces only (like stainless steel)
• Covers approximately 24 to 36 square feet per bucket
• The Johnsonite 946 contact bond adhesive can also be special ordered in a 1.44 gallon (6 KG) bucket. Please contact us for pricing and more information.

Lead time of this transition strip adhesive will depend on stock (typically 1-3 weeks). Please call for availability.

Johnsonite 946 contact bond adhesive can be used to install:

• Vinyl Wall Base on non-porous surfaces
• Rubber Wall Base on non-porous surfaces
• Transition Moldings
• Vinyl Track Base

This vinyl and rubber base adhesive can also be used to install Johnsonite Millwork Wall Base, Edge Guard Moldings, and Cove Caps. These items are not currently sold in Installerstore. Please visit our website CoveBase-n-Transitions.com for a selection of these products.

Product Specification Data Sheet for this product.
Material Safety Data Sheet for this product.

We carry a full line of adhesives and tools you need to properly install wall base.