Loba Nature Oil - Caring for Oiled Wood Floors Made Easy
Loba Nature Oil is for the initial treatment of hand-oiled wood floors. It can also be used for wood floors that have been factory pre-treated with oxidizing oils. Not suitable for use on non-absorbent UV-oiled products. This easy-to-use oiled wood floors maintenance is sold in a 32 oz bottle, which covers approximately 350 to 1,000 square feet (depending on absorbency).
Application Directions for Loba Nature Oil:
- Before using, read through directions on bottle.
- Always test in a small inconspicuous area first, for desired results.
- Shake material well before use.
- Do not thin. Do not add water.
- Do not apply at temperatures below 55 degrees. Make sure material is at room temperature.
- Always maintain adequate ventilation during all phases of the coating and drying process.
- Apply evenly at the recommended coverage rate (listed below).
- Avoid streaks, puddles and lap marks.
- Use water to clean tools immediately after use.
Additional information and application instructions
Application Coverage for the Oiled Wood Floor Maintenance Product:
- For newly installed: as well as freshly oiled floors, clean the floor thoroughly to remove all dust and grit (sweeping, vacuuming) and apply an even coat of Nature Oil using a lint-free cloth or sponge, wiping off any excess oil; do not allow the oil to pool or puddle.
- For used floors with wear marks: clean thoroughly with Loba Hardwood Floor Cleaner. Allow floor to dry completely. Apply Loba Nature Oil.
- For larger areas: the product can be applied using the Spray Cleaner method. Spray Loba Nature Oil onto the floor, and buff the entire area using a floor machine fitted with a white pad.
We also carry the Loba Floor Care Parkett Oil which deep cleans and restores the beauty of oiled wood floors.
Check out our entire collection of Loba Floor Care Products to transform your home. Order today! |