Cement Grout Haze Remover | Stone & Tile Haze Remover

Grout Haze Remover can be Used On:

• Tile
• Stone
• Concrete
• Masonry Surfaces
• Interior and exterior surfaces

Omni Cement Grout Haze Remover Application Steps - During Grout Installation Clean-up Process:

1. Add approximately 3 ounces of cement grout haze remover to every gallon of water used in the grout cleanup process
2. Perform grout cleanup per manufacturer's instructions
3. If sealer is to be applied, allow surface to dry 24 hours prior

1. Apply cement grout haze remover liberally on cement grout residue using a sponge, mop, or brush
2. Allow grout haze remover to dwell on surface for up to 10 minutes
3. Agitate with a white nylon scrub brush or other non-marring scrubbing tool until cement grout residue is removed from the surface
4. Thoroughly rinse surface with water. A wet/dry vacuum may also be used
5. Wipe surface completely dry using a clean, dry, white cotton or micro-fiber towel
6. If sealer is to be applied, allow surface to dry 24 hours prior to applying