Multi-Surface Surfactant Cleaner Prevents Soap Scum
Clean for less with Omni Concentrated Cleaner for tile, stone, concrete, masonry, grout and other water safe surfaces. Regular use of this surfactant cleaner prevents soap scum and hard water build-up. Use this concentrated cleaner on interior and exterior surfaces. Not only does the Omni Concentrated Cleaner clean multiple surfaces effective, but it also leaves a clean, fresh, long-lasting Rosemary scent.
Concentrated cleaner is sold in a 70 oz container, which requires dilution before using. This multi-surface surfactant cleaner covers approximately 5,000 to 10,000 square feet, depending on the type of surface, porosity, texture, temperature, method of application and dilution. Once the Omni concentrated cleaner is diluted, it can make up to 70 gallons of cleaning solution.
Use this concentrated cleaner on: tile, stone, concrete, masonry, grout and other water safe surfaces.
Dilution Rate: Add 1 to 2 ounces of concentrated cleaner per gallon of water
Omni Concentrated Cleaner Application Steps:
- Ready entire label before using. Use only as directed
- Sweep or vacuum surface to be cleaned to remove any loose contaminants
- Add 1 to 2 ounces of Concentrated Cleaner per gallon of water
- Liberally apply cleaning solution to the surface to be cleaned with a sponge, mop or brush
- Allow cleaning solution to dwell on surface for up to 5 minutes
- Agitate with a white nylon scrub pad or a natural-bristle brush or other comparable non-marring scrubbing tool until surface is clean
- Mop up dirty solution. A wet/dry vacuum may also be used
- Thoroughly rinse surface with water, changing water at least every 250 square feet
- Wipe surface completely dry using a clean, dry, white cotton or micro-fiber towel
- If surface is to be sealed, allow 24 hours drying time prior to applying a high quality sealer
Additional information and application instructions PDF file
Don't forget to browse our full line of durable and economical cleaning mops and accessories!
|