Omni Elite Sealer

Omni Elite Sealer

Omni Elite Sealer - Tile & Stone Sealer

Purchase this easy-to-use tile and stone sealer to protect surface while preserving the original beauty.  This tile, grout and stone sealer provides maximum stain protection, especially in food preparation and food service areas. The Omni Elite Sealer creates an extremely durable stain barrier, and makes on-going maintenance easier. You can even use this inside or outside, for example as an exterior stone sealer. Sold in a pint (16 oz) bottle which covers approximately 75 to 375 square feet per coat, depending on the type of surface, porosity, texture, temperature, method of application and number of coats. 

Omni Elite Sealer Product Highlights:
  • Can be used indoors or outdoors
  • Can also be used as a pre-grouting sealer
  • Unique Low VOC Formular
  • Grout, stone and tile sealer allows moisture vapor transmission
  • Up to 15 years expected wear, depending on type, density and texture of sealed surface, foot traffic, cleaning methods and weather conditions
  • Harsh cleaners containing ammonia bleach, high acid, high alkaline or solvent can affect sealer's performance
  • Use on: unglazed tile (such as ceramic, porcelain and quarry), natural stone (such as granite, limestone, marble, onyx, quartzite, sandstone, serpentine, slate, soapstone and travertine
  • Works great as a sealer on: Concrete and Masonry surfaces (brick, pavers, saltillo, stucco and terra cotta) and sanded and non-sanded cement grouts

Additional information and application instructions PDF file

Stone, Grout, Masonry and Tile Sealer Application Instructions:
  • Remove existing sealers and coatings/waxes
  • Apply Omni Elite Sealer liberally to surface using a sponge or a mop, paint-pad applicator, paint roller, brush or white cotton or micro fiber towel
  • Allow the stone, grout and tile sealer to penetrate for up to 5 minutes
  • Wipe surface completely dry suing a clean, dry, white cotton or microfiber towel
  • Some surfaces may require 2 or more coats
  • Allow at least 30 minutes drying time between coats
  • Surface is ready for traffic in 12 hours after final coat. Keep area dry for at least 24 hours
Omni Elite Sealer Tip: Periodic testing of sealed surface is recommended by simply applying a few drops of water. If water soaks in, apply additional coat(s) of Elite Sealer.

We carry a vast product line of the Omni Sealers and Floor Care Products.
Details
Master SKU 13-0050
 
Our price: $30.89
Options
Choose Size
Quantity
Omni Elite Sealer 16 oz
Omni Deep Cleaner Omni Clean and ReSeal
$19.29
$15.99