Epoxy Grout Haze Remover - Grout Residue Remover for Tile, Stone & More

Use Omni Grout Haze Remover On:

• Tile
• Most Stones
• Concrete
• Masonry Surfaces
• Interior and exterior surfaces

Epoxy Grout Haze Remover Application Steps:

1. Apply a small amount of water to surface to be cleaned
2. Apply epoxy grout haze remover liberally using a sponge, mop, brush or low-pressure pump sprayer
3. Allow haze remover to dwell on surface for up to 10 minutes
4. Agitate with a white nylon scrub pad or a brush that is non-marring
5. Scrub until epoxy or urethane grout haze/residue is removed from surface
6. Thoroughly rinse surface with water. Wet/dry vacuum may also be used
7. Wipe surface completely dry using a clean, dry , white cotton or micro-fiber towel
8. If surface is to be sealed, allow 24 hours drying time prior to applying