High Gloss Sealer for Tile, Porous Natural Stone and Concrete

Get the desired wet look on your tile, concrete or stone with the Omni High Gloss Sealer.  This high gloss tile sealer provides excellent stain protection from water-based and oil-based contaminates. The innovative water-based technology provides an extremely durable high gloss coating to tile, natural stone, concrete, masonry and cement grout surfaces.

Omni High Gloss Sealer Highlights

• Sold in a 32 oz bottle that covers approximately 75 to 250 square feet per coat
• High Gloss
• For interior use only
• Not recommended for areas subject to standing water such as pools, spas, showers, etc.
• Up to 3 years wear depending on type, density, foot traffic, etc
• Unique formula allows moisture vapor transmission
• Unaffected by ultra-violet light
• Use On: unglazed tile (ceramic, porcelain and quarry), porous natural stone (limestone, slate, soapstone and travertine), concrete and masonry surfaces (adobe, brick, pavers, saltillo, and terra cotta), and sanded/non-sanded cement grouts

Additional information and application instructions PDF file

Omni High Gloss Stone & Tile Sealer Application Steps:

1. Read entire label before using. Use only as directed. Always test in a small inconspicuous area to determine desired results. Remove existing sealers from intended application surfaces
2. Apply thin, even, overlapping coats of high gloss tile sealer using a sponge, paint applicator, soft brush or sprayer
3. Most surfaces require 2 or more coats of High Gloss Sealer
4. Allow at least 30 minutes of drying time between coats
5. Surface is ready for traffic in 12 hours after final coat. Keep area dry for at least 24 hours.
6. Expert tip: if over time, heavy traffic after the High Gloss sealers' gloss or appearance, additional coats can be applied, as product will easily and effectively bond to itself

We have even more affordable and effective Floor Care Products for your home or office. Available now!