Omni Low Gloss Sealer - Tile, Stone, & Masonry Sealer for Bricks

Use Omni Low Gloss Sealer On:

• Unglazed Tile (ceramic, porcelain, and quarry)
• Porous natural stone such as limestone, slate, soapstone and travertine
• Concrete and masonry surfaces such as Adobe, Brick, Pavers, Saltillo, and Terra Cotta
• Sanded and non-sanded cement grouts
• Can also be used as a pre-grouting sealer
• Interior and exterior applications

Omni Low Gloss Sealer Application Steps:

1. Read entire label before using. Use only as directed. Always test in a small inconspicuous area for desired results. Allow new grout installations to cure for at least 48 hours prior to application. Be sure surface is clean, thoroughly dry and free of sealers, coatings and contaminates before sealing.
2. Apply thin, even, overlapping coats of Low Gloss Sealer using a sponge, or a paint-pad applicator, soft brush or sprayer
3. Most surfaces require 2 or more coats of Low Gloss Sealer
4. Allow at least 30 minutes drying time between coats
5. Surface is ready for traffic in 12 hours after final coat. Keep area dry for at least 24 hours
6. Expert tip: If over time, heavy traffic and/or maintenance methods alter Low Gloss Sealer's gloss or appearance, additional coats can be applied, as product will easily and effectively bond to itself