Penetrating Sealer for Natural Stone & Tile - Omni Sealer

Use Omni Penetrating Sealer On:

• Unglazed tile (ceramic, porcelain and quarry)
• Natural Stone (granite, limestone, marble, onyx, quartzite, sandstone, serpentine, slate, soapstone and travertine)
• Concrete and masonry surfaces (brick, pavers, saltillo, stucco and terra cotta)
• Sanded and non-sanded cement grouts
• Interior and exterior applications

Application Directions for Penetrating Sealer:

1. Apply Omni Penetrating Sealer liberally using a sponge, sprayer, mop, paint-pad applicator paint roller, brush or white cotton or micro-fiber towel
2. Allow Penetrating Sealer to penetrate surface for up to 5 minutes
3. Wipe surface completely dry using a clean, dry, white, cotton or micro-fiber towel
4. Some surfaces may require 2 or more coats
5. Allow at least 30 minutes drying time between coats
6. Surface is ready for traffic in 12 hours after final coat. Keep area dry for at least 24 hours
   Expert Tip: Periodic testing of sealed surface is recommended by applying a few drops of water to area. If water soaks in, apply additional coat(s) of Penetrating Sealer