Effective Stone Tile Sealer - Omni Pro 10 Tile and Grout Sealer
Omni Pro 10 is an innovative tile and grout sealer that creates a highly durable stain barrier that doesn't change the look of the surface applied to. With a unique low VOC formula, it allows the stone tile sealer allows for moisture vapor transmission. Once this tile, grout, stone and stucco sealer is applied, it provides up to 10 years of stain protection from water-based and oil-based contaminates. Sold in a pint container which covers approximately 38 to 188 square feet per coat, depending on the type of surface, porosity, texture, temperature, method of application and number of coats.
Omni Pro 10 Sealer Safe For:
Unglazed tile (ceramic, porcelain, and quarry), natural stone, concrete and masonry surfaces (brick and stucco). Highly recommended for use on sanded and non-sanded cement grouts. Safe to be used interior and exterior applications.
Tile and Grout Sealer Instructions:
- Read entire label before using. Use only as directed. Always test in a small inconspicuous area with a 24-hour cure time to determine desired results. Allow new grout installations to cure for at least 48 hours prior to application.
- Be sure surface is clean, thoroughly dry and free of sealers, coatings and contaminates before sealing
- Apply Pro 10 Sealer liberally to surface using a sponge, mop, paint-pad applicator, paint roller, brush or white cotton/microfiber towel
- Allow the tile and grout sealer to penetrate for up to 5 minutes
- Wipe surface completely dry using a clean, dry, white cotton or microfiber towel
- Some surfaces may require 2 or more coats
- Allow at least 30 minutes drying time between coats
- Surface is ready for traffic in 12 hours after final coat
- Keep area dry for at least 24 hours
Additional information and application instructions PDF file
If you're looking for cleaners, sealers or polish, we have you covered. Check out our Floor Care Products today! |
