Masonry Sealer - Great as a Stamped Concrete Sealer

SealNShine Concrete Sealer Instructions

• Wash surface and let dry for 24 hours
• Stamped concrete sealer can be applied by roller (short nap mohair), low pressure airless spray, or brush
• One coat is sufficient in most cases; however, a second coat can be applied after 4 hours
• Let coating dry for 72 hours for best possible curing time and heavy traffic
• Be sure to follow detailed instructions included with product for best results

Stamped Concrete Sealer Notes:

• Masonry sealer coating can become slippery; a non-skid product can be added to help
• Avoid puddling, overlapping, and heavy build up during application
• Coverage is 60 sq ft - 125 sq ft per quart*
• A gallon will cover 250 sq ft - 500 sq ft*

*Coverage may vary depending on type of surface and surface porosity.

Masonry Sealer Available Sizes: