Remove Wood Floor Adhesive - Sentinel Eco-Friendly Formula

Remove adhesive from wood floors with Sentinel 922 Urethane Adhesive Remover. Use for cleaning wood floor adhesive and to remove urethane. This high performance formula is eco-friendly, low odor and biodegradable. Available in 2 convenient sizes for your home or workplace. It is recommended to clean and remove urethanes before they are fully cured.

Spot Cleaning On Newly Installed Floors Directions:

• Apply Sentinel 922 with a rag or by pouring on the surface
• Allow to soak for 1 hour
• Using plastic putty knife, gently remove softened adhesive
• Wipe excess urethane adhesive remover from the floor
• Wash entire floor with 810 All Surface Floor Cleaner
• Do not scrub to aggressively, this could alter the finish

• Wet the adhesive surface with 922 with sprayer or mop
• Allow to soak 30 - 60 minutes depending on thickness of adhesive
• Scrape the softened adhesive with a plastic or razor scraper
• Protect walls, drains, and cracks in flooring with an absorbent like kitty litter or sawdust
• Wash and rinse with 810 All Surface Floor Cleaner

• Cut the wood in 8"x 8" square blocks with a circular saw
• Be careful not to cut into the sub-floor
• Vacuum sawdust off of the floor
• Apply 922 liberally using a squeegee or mop
• Make sure this penetrates the cut line
• Allow 922 to penetrate floor 4 - 8 hours
• Pry old flooring with a spade or similar tool
• Squares should be intact and easily removable at this point

Sentinel Adhesive Remover Available Sizes:

Find even more quality Sentinel products for all your floor maintenance needs. Order today!

Material Safety Data Sheet for this product.