Gundlach Gloss & Seal - Crystal Clear Water Based Sealer

This groundbreaking sealer is perfect for use on slate, satillo, pavers and more! The self-leveling component makes applying Gloss & Seal a breeze. Gloss & Seal creates a breathable, UV protected layer that penetrates the substrate to protect from oil and water based stains. NOT recommended for use on polished, glazed/ceramic and non porous surfaces as this can affect the self leveling component negatively. 

Water Based Gloss & Seal Highlights

• Glossy topical coating
• Crystal clear finish
• Easy-to-use, self leveling application
• Can be applied as soon as 48 hours after grout is applied
• Formula will not blush or whiten
• Protects agains harmful UV rays
• 24 hour cure time
• Suitable for indoor and outdoor use
• VOC (Volatile Organic Compound) content complies with sales standards in all 50 US states
• DO NOT DILUTE 
• (1) Gallon covers approximately 400-1000 square feet
• Wears within 5 years

How to use Gloss & Seal Protective Coating:

• Ensure surface is clean, dry and free of all debris, waxes and seals
• Wait at least 48 hours after installing your flooring before using Gloss & Seal
• Apply solution with roller, brush or low pressure sprayer
• Allow 24 hours for seal to cure
• Test area using water droplets. If water is absorbed, you may need to use another coat

Take a look our other amazing products by Gundlach and get started today!

Directions

SDS Sheet